Heat recovery unit Ambientika Office D200mm

Handling

Can be controlled with the Ambientika app (Download on Google Play or AppStore).

1. When a button is pressed in the APP, the APP communicates with the Südwind SERVER via the internet. The Südwind SERVER in turn communicates with the ventilation unit’s master unit via the internet.
2. If the INTERNET or the SERVER are not working properly for any reason, then the device can no longer be controlled via the APP. (The only option for then controlling it is the optional remote control) In this case, the master ventilation unit continues to function in the last mode selected, unless it is controlled using the remote control, until the home WiFi network is reactivated (even without internet access).
3. If the SERVER or the INTERNET are not working properly and the master ventilation units are in SMART mode (mode in which the information gathered online is used), then the devices continue to function with the last weather data they received before the problem occurred. As soon as the devices get an internet connection again, the data will be updated automatically.

Placement

If more than one appliance is installed, they should be installed as far apart as possible. This ventilates the whole living space, giving the most effective ventilation effect. One appliance covers approximately 30 m² of living space.

Function

The product is equipped with a ceramic heat exchanger that stores heat when the air is exhausted from the room and transfers the heat stored in the heat exchanger to the incoming air when the air is exhausted from the outside. The heat exchanger shall be wall-mounted. The pipe inside which the ceramic heat exchanger is located shall be fitted with walls having a maximum thickness of 400/500 mm. The pipe may be shortened to a minimum of 250 mm.

Equipment

• The device can be wirelessly connected to other devices. These then communicate via your router. Ventilation zones can be created for initial commissioning using Bluetooth (e.g. day and night area, each device is given a name). An internet connection is mandatory;
• Option of choosing between different settings and programs  with the Ambientika App;
• Heat recovery efficiency up to 93%;
• Speed can be controlled with an output of up to 100 m3/h;
• Double filter, separated by air intake and air outlet, easy to remove and clean;
  
• No condensate discharge required;
• Length up to 500 mm
• Alternating airflow
• Electronically controlled motor (brushless)
• Energy-saving;
• Quiet operation;
• Devices with direct extraction must be attached to external walls of a building and have an installation duct which is between 250 and 500 mm long;
• The installation duct can be extended outward by up to three metres using a duct with the same diameter. Where an extension is required, the maximum permissible length of the pipe is 2.5 metres (including a 90° bend);
  
• Easily removable and washable filters and heat exchanger.

Included in the package:

• complete set ventilation unit: if the wall thickness is less than 50cm, nothing else is needed;
• installation model;
  
• instructions manual;
• Flush-mounted box to optionally mount the indoor unit flush with the wall.

More information from manufacturer`s website >

Technical specification